Media Options

Choosing the right filter media . . . a basic guide

Media	Application	Cclean**) gr/ft3 (mg/m3)	Advantage	Note:
FE 2502	All	0.4 (<1)	Broadest range of applications Very good separation efficiency Very high mechanical stability Very good cleaning behavior	For very adhesive dust - precoating with FHM is required Tmax = 212ºF (100ºC)
FE 2509-01	All	0.4 (<1)	Very good dust release performance especially for powder coating applications.	Mechanical stability Tmax = 180ºF (82ºC)
FE 2520	Cement Concrete Wood "Wet" Processes Fibers	8.0 (<20)	Low filtering DP	Mechanical stability Tmax = 212ºF (100ºC)
FE 2521-01 (PTFE)	Very adhesive or sticky dust, (e.g. "laser" processes)	0.2 (<0.5)	No precoating necessary Excellent cleaning properties Higher ACRs are possible	Cleaning:  Reservoir pressure 60 psi (PT<4 bar) Tmax = 212ºF (100ºC)
FE 2501-01 FE 2508-01	Explosive dusts to avoid ignition caused by electrostatic charges	Same as basic FE	Electrically conductive	Perfect grounding is required Caution is required at all applications

**) The clean gas concentration depends strongly on cleaning conditions and powder characteristics. In some cases the clean gas concentration may be lower or higher than the given value.