IAC Series Horizontal

Application:
Designed to be lightweight, overhead, with powerful suction to remove dust and fiber contaminants from welding, cutting, grinding, or sanding operations. Highest efficiency removal down to 92% at 3 micron size particles.

Filter Media:
Clark Air Systems utilizes the longest life, lowest maintenance filters available: 

1st Stage:
Multi-ply, depth loading, Panel filters with tackified media. The large amount of media in the air cleaner is designed to keep maintenance to a minimum. These 35% efficient filters catch the bulk of the fibers generated from welding, cutting, grinding, or sanding operations. 

2nd Stage:
92% initial efficiency pocket filters catche fine dust particles rated at 92% removal of particles 3 micron or larger.

Maintenance: 
Replacement of filters periodically. Only a few minutes are required to replace any filter. The frequency depends on conditions. Average six months on the final filter. Magnehelic filter gauge is to monitor filter resistance. 

Cabinet: 
The units are constructed with 16 gauge welded steel. Hinged, gasketed door allows easy access to all stages of filtration. The entire unit is finished with a corrosion resistant baked-on powder coating. The welded steel handles are also powder coated. 

Unit Specs:
Air Flow Capacity: 5000 cfm 
Amp Draw: @ 230 volt/1 PH = 9.5 amps , @ 115 volt = 19.5 amps 
Unit Weight: 380 pounds 
Unit Dimensions: 46"W x 27"D x 72"H 
Motor: 2 Horsepower, TEFC motor, 1750 RPM, with backward incline SWSI Corrosion proof blower wheel